The FLIR Elara™ FB-Series ID thermal security camera uses onboard analytics to classify human or vehicular intrusions, making it ideal for perimeter intrusion detection and sterile-zone monitoring. The Elara™ FB-Series ID can also hand off classified intrusions to FLIR PTZ cameras for autonomous tracking of intruders. Easy to set up, Elara™ FB-Series provide reliable detection with low false alarm rates in challenging environments, bad weather, and complete darkness.
Best-in-class intrusion detection with on-board analytics
-
RELIABLE ANALYTICS WITH FEW FALSE ALARMS
The Elara FB-Series ID classifies human and vehicle intrusions, and hand-off targets to autonomous PTZ tracking cameras.
-
“PLUG AND PLAY” INTEGRATION
The camera is fully certified by third party video management systems, as well as FLIR United VMS.
-
INDUSTRY-LEADING PERFORMANCE AND RELIABILITY
FLIR’s award-winning thermal technology is backed by the industry’s most extensive warranty.
SPECIFICATIONS
OVERVIEW
- Array Format (NTSC) – 320 x 240
- Detector Type – Long-Life, Uncooled VOx Microbolometer
- Dimensions (L x W x H) – 285 x 96 x 94 mm/11.1″ x 3.8″ x 3.7″ With sunshield and fully extended mounting arm
- Effective Resolution – 76,800 pixels
- Focal Length – 24mm
- Focus Range – Athermalized, focus-free
- Pixel Pitch – 12u
- Sensitivity – <50mK @ 25c F# 1.0
- Spectral Range – 8 µm to 14 µm
CONNECTIONS & COMMUNICATIONS
- Composite Video NTSC or PAL – Hybrid system with IP & analog video
- Ethernet – 10/100 Mbps
- External Analytics Compatible – Yes
- Network APIs – Nexus SDK for comprehensive system control and integration; Nexus CGI for http command interfaces; ONVIF Profile S
- Supported Protocols – IPV4, HTTP, Bonjour, UPnP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, ICMP, IGMP, DHCP, ARP
ENVIRONMENTAL
- Humidity – 10%-90% relative humidity
- IP Rating (dust & water ingress) – IP66
- Operating Temperature Range – -40°C to 50°C
- Storage Temperature Range – -20°C to 70°C
- Regulatory – FCC Part 15 (Subpart B, Class A), CE marked, EN55032, EN55024, RoHS, WEEE
IMAGING & OPTICAL
- f-number – F1.0
- Field of view (FOV) – 9°
- Image Uniformity Optimization – Automatic Flat Field Correction (FFC) – Thermal and Temporal triggers
- Thermal AGC Region of Interest [ROI] – Default, Presets and User Defined for optimal image quality of subjects of interest
- Thermal Image Settings – Auto AGC, Dynamic Detail Enhancement (DDE), Brightness, Sharpness, Contrast
MEASUREMENT & ANALYSIS
- Analytics Features – Region Entrance/Intrusion Detection, Crossover/Fence Trespassing; Auto/Manual Depth Setup, Human and Vehicle Rules, Hand-off target to autonomous PTZ tracking, Tampering Detection
- Analytics Management – Web-based configuration and management, Masking of analytic detection areas, adjustable sensitivity, automatic responses, remote I/O control
POWER
- Input Voltage – 12 VDC 24VAC PoE
- Power Consumption – 12 VDC: 17 W (maximum with heaters) 24VAC : 13 VA (maximum with heaters) 24VDC : 13 W (maximum with heaters) PoE: 13 W
VIDEO & RECORDING
- Digital Video Compression – Two independent channels of H.264 and MJPEG
- Streaming Resolution PAL/NTSC – Native: 320×256
- Video Frame Rate – NTSC: 30 Hz
Export Restrictions
The information contained in this page pertains to a dual use product controlled for export by the Export Administration Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to export or transfer to foreign persons or parties unless otherwise prohibited.
